Radio & telecom
4G/LTE cellular phone
Understand how a phone attaches to a cell: OFDM modulation, mobility, echoes and useful throughput.
What you get
A simulated cellular link where throughput drops as you move away or as echoes increase.
Parts (simulated)
- Built-in RF/SDR lab
- Multipath channel model
- Virtual measurement instruments
Nothing to buy: every component here is simulated in the browser.
Project steps
- 01Configure the cell's band and channel width.
- 02Transmit with multi-carrier modulation and watch the spectrum.
- 03Add mobility and multipath.
- 04Measure the impact on error rate and useful throughput.
- 05Compare with the Wi-Fi and satellite links.
What you learn
- Multi-carrier and channel width
- Multipath and fading
- Throughput / range / robustness trade-offs
For teachers
Get the teaching pack: 6 ready-to-run sessions
Full progression, objectives, student steps and an assessment grid — printable, free.
One address, no spam: just the pack and classroom updates.
Other projects
- ⌚ Smartwatch
Build a complete watch: OLED screen, DS3231 real-time clock, navigation buttons, then the printed board that goes with it.
- 📺 Mini colour TV (SPI TFT)
The finish line of a 10-project display series: from a single pixel to a colour panel driven over SPI.
- 📻 Digital PMR446 walkie-talkie
A full radio link on the PMR446 band: modulation, channel, noise, demodulation and quality measurement.
- 🛰️ LEO satellite link (telemetry)
A telemetry link with a low-Earth-orbit satellite: very long distance, low power and Doppler shift.